Login
Register
Forum
Welcome, Guest
Username: Password: Remember me

TOPIC: LocPrecision V2

LocPrecision V2 8 years 3 months ago #657

  • rob pierce
  • rob pierce's Avatar
  • Offline
  • Expert Boarder
  • Posts: 94
  • Karma: 0
Does anybody have a locprecision V2, the 5.5" body tube size? I want to try a level one certification with it, and want advice on motors. The rocket is suggested for H, I, and J motors, and I wanted to start with an H motor. It weighs 84oz. Any suggestions?
The administrator has disabled public write access.

Re:LocPrecision V2 8 years 3 months ago #658

  • Aaron Head
  • Aaron Head's Avatar
  • Offline
  • Expert Boarder
  • Posts: 142
  • Karma: 0
I built the LOC 5.5" V2. It can be launched on any higher power H and any I motor. I launched mine on an I357 and it went about 2500' If you were to go with an H180W with the 6 second delay, you should get somewhere near 1000' to 1500' I don't think I'd launch it on a H motor smaller that an H180 because of all the nose weight that has to be added to make it stable.

-Aaron
The administrator has disabled public write access.
Time to create page: 0.221 seconds